Description
Introduction:
High quality 6063 aluminum body, durable to withstand any harsh condition
Low current draw- no harms to battery and save gas
Longer valid irradiation distance than normal halogen bulb
Suitable vertical fins design for better cooling
Great performance of waterproof, dustproof, shockproof, Anti-corrosion
Technical Specification:
Power: 18W 6pcs*3W intense LED chips
Voltage: 9-32V
Lumen: 1260~1800lm
Beam: 60 degree (Flood beam pattern)
Working Temperature: -40~ 85degree Celsius
Size (with bracket): 99*73*107mm/ 3.9*2.87*4.2inch approx.
Protection Rate: IP67
Color Temperature: 6000K
Material: 6063 aluminum profile, metal bracket, PC Lens
Working Life: 50000 hours
Certified by CE & RoHs
Package Included:
18W LED Work Light x 2PCS
Adjustable Mounting Brackets
Screws Set
Attention: There are two kinds of packing, randomly delivered.
Bob –
works good
used as rear lights on my UTV. Works well and is bright enough, as expected.
Alyssa McKennon –
Did not come with mounting bracket no response from seller
Ordered the pair and only got one bracket for one. Tried calling and emailing but no response so far. Lights seem to be decent but can’t install and wire them without all the parts that were supposed to be with them.
Amazon Customer –
they are great lites for the price and the wireing kit is spot on thanks
i found everything was good once you got it all together it fit well
Roshi –
Missing hardware makes it annoying to set up
Dude they don’t include the 4 male connectors for the pods super lame had to get them separately the kit isn’t plug and play it’s a hassle they failed in giving you all the hardware u need to install.
Arfalksen48 –
Bright enough for my UTV
There are no connectors on the end of the wires on the lights to plug into the wiring for the power and switch.
Claude –
Perfect
Nice and brightPerfect for what I needed
Honest reviewer –
Not as advertised.
Mediocre pods at best. So, right off the bat, when I opened the box up, I noticed that there were no ends on the wires supplying the pods themselves. The harness end has female butt connectors with clear silicone jackets but, only bare, tinned wires on the pods. Nowhere in the listing does it show or explain this. And it’s clearly done on purpose because it shows them this way in the instructions in the box lol! Then, I noticed that the LED chips were a little off center and that they were unusually small. I kind of expected this, considering the incredibly cheap price of the kit. Definitely didn’t like the ON/OFF clicky push button with the double sided tape. And why does this kit need a 30amp fuse if it’s only pulling 18watts??? Something doesn’t add up here. So, I went ahead and installed them anyway. Just tested them tonight (12-29-18) and they actually didn’t even meet my already low expectations. Now, when they say “Flood”, they mean it. There’s light being cast EVERYWHERE. To the amount that they’re almost useless for any kind of motor vehicle. If they were 2-3 times brighter, then sure, not too bad but, almost all the light is lost. They’re definitely more close to around 600 lumen than 1800. I would believe them if they were listed as 600… MAYBE. Would work great for close up work but, nothing beyond 10-15ft away. Since I had to chop up the wiring harness to get them to work on my quad, I’m just going to keep them as auxiliary lights in addition to the crappy halogen ones. They got the name right though… AUXbeam. Because they’re really only good for auxiliary lighting and definitely shouldn’t be used as a primary light source. I find it interesting though, that they’re rated to handle up to 32 volts… I have a funny feeling that if I supply them with that much voltage, I just might get the advertised 1800 lumens of output. I doubt they will last long that way though. OK, I ordered some DC buck boost voltage regulators and when they show up, I’ll wire them in, crank up the power to probably 30 volts and see what happens! For the price, I’m willing to experiment and possibly sacrifice these lights lol!*UPDATE*Got yhe buck boosters and wired one in. Found out that these pods are internally regulated so, increasing the supply voltage does nothing. Still mediocre output 😑
Jim Wilkins –
The harness that came with it is very nice. The major work in installation is drilling holes …
Very bright. I installed them as deer lights. The elevation adjustment is not quite enough. The harness that came with it is very nice. The major work in installation is drilling holes for mounting and fishing harness wires. The push-button switch looks like the weak link. The wire for it is a bit short to allow you to see the LED while driving. The LED tells you whether there is power to the unit, red, or if the lights are on, green. You need to take your eyes off the road to look at the LED.
Amazon Customer –
Great buy for the money
Great lights for the price! Don’t hesitate to buy. My only complaint is that the mounting bracket is a bit odd. The bracket gives a great slim line look, but very awkward when trying to adjust the light for proper mounting. That being said for the price they look like they are of great quality. I’ve only had them mounted for a week so we’ll see about their longevity. The wiring harness comes with an illuminated push button on/off switch. The kit also comes with a relay and fuse. For the price they are hard to beat especially with the included wiring harness.
Mason –
Great light pods! Just before install take apart and seal!
I have a pair of these for about 2 months now and I love them. I got them to replace my headlights on my Polaris ATV as replacement bulbs would have been over $40 a piece! So this was a no brainer. The supplied mounting brackets worked great as well. All I recommend is when you first get them take the 4 Allen screws out and pop off the sides and just bead some black RVT or some sort of sealer around the edges to seal them a little bit better. My four wheeler sits outside in the rain and I wash it after every ride and have zero moisture in them at all. Great product would buy again!