Description
Dmx an2 is a multi-purpose Art-Net/sACN node that converts 1 Ethernet cable to 2 DMX universes. Its optical and electrical isolation is ready for any situation and the durable Neutrik ethercon in/through port ensures reliability. The built-in web-based GUI means no universe/subnet setup. Dmx-an2 automatically redirects the web page If the IP address is changed. The unit supports power over Ethernet (pole) or an external power supply. Both outputs can be set to either Art-Net or sac and dmx-an2 functions as an partner to DMX or DMX to Art-Net interface. Onboard LED indicators quickly inform status and the integrated mounting bracket is included to quickly install into any location.
From the manufacturer
About us
Our mission is to create customer-driven solutions in the world of professional lighting. We are passionately dedicated to delivering high performance lighting products and related accessories worldwide at unparalleled value.
Shyam Singh –
SACn easy peasyEasy to setup .. built like crap .. if you need tough ..this ain’t enough .. if you need cheap then this is deep .. even better yet.. power over Ethernet .. could be worse but you got 2 universe
Nerdom –
Cheap and reliable Artnet/sACN nodeThe AN2 does what it says it does. It outputs or takes an input of 2 DMX universes and sends/receives that data over Artnet/sACN. Apart from a somewhat clunky and slow web UI, the device functions as expected and I haven’t had any issues with it. Note that it does not support RDM.It’s not a pathport octo, but neither is it’s price, so for a small and portable Artnet node it’s great.
Mike Morris –
This fixed my flickering problemI was using a competitor’s interface with RGBW LED strips hooked to a DMX decoder. I kept having random flickering and flashing that I could not fix. I finally swapped out the interface with this, and it has been rock solid with no issues. My only complaint is that it is not set to DHCP from the factory. So I had to hook it up to my computer, change IP addresses, and then switch it over to DHCP for my network. It would be much easier to setup with DHCP set by default.
Franko Barreto –
Excelente RecomendadoExcelente Recomendado
Pipipopo –
It’s okKind of a pain to setup, but good value for the money. Two universes of DMX data, the AN2 has DHCP support. The Enttec ODE is a better node, but you only get 1 universe.
Max –
Great dmx lighting device for QlabVery reliable dual universe dmx device… I use it with Qlab and it works like a dream
Graham –
Excellent Artnet Dmx InterfaceExcellent product – easy to use and reliable.
DR W. –
Works well with QlabA little tricky to set up if networking is not your strong point, works well with Qlab
Chirro –
ExcelenteHasta ahora he estado trabajando con diversos interfaces USB, pero esto me ha abierto muchas posibilidades. Ahora puedo manejar las luces directamente desde el IPad (con Luminair 3, Vibrio, Stagelight, etc.) y por Wifi.Además le tengo enchufado un emisor Lixada y todos los fixtures van con receptores de la misma marca, todo sin cables.Probado también directamente desde el ordenador con un cable de red (con QLC+) y va perfecto.Me lo tenía que haber comprado antes.
Carlos –
Fácil configuración. Ningún problema.Muy fácil de configurar. Lo tengo conectado a un router wifi para una red de DMX inalámbrico. Probado tanto en ArtNet como en sACN y de momento ningún problema.