Description
PRODUCT SPECIFICATION
RF Frequency Range：500MHz
Working Range：50m(approximately 200ft)under typical conditions
Audio Frequency Response：50to18,000Hz-3dB
Audio Output Level(+-20khz deviation, 1 KHZ tone)：1/4-inch connector(into 3k load): -8.8dbv(Hi Z),XLR connector
RF Sensitivity：85dbm, typical
System Distortion(ef +15 deaton, 1 KHZ modulation）：0.4%
Power Requirements：Handheld and Bady-pack,3V battery
Current Drain:
Transmitter: 50MA average(70MA max)
Receiver: 100MA average(130mamax)
Operating Temperature Range:
-20 to 50 (-4″to 122 F ). NOTE: Battery characteristics may limit this range
Matters Needing Attention
1. You will need an extra audio equipment like speaker to connect with this product to make the sound working.
2. Please keep the receiver away from the metal or any digital devices (such as computers, cellphones, etc.) to avoid potential sources of interference.
3.The receiver should be more than 1m from the ground. Please avoid to be against a wall.
4.Please do not use the microphone facing the receiver too closely, in order to avoid noise interference.
5. Please do not flap the microphone head with hand, or it would be damaged.
6. During the performance or presentation lid the N/MEOFF sw to the MUTE position when the system is not being used7 When the pomme or present s d e m r N swh o t OFF posion to conserve battery
Any problem, please contact us
Roger A Kinter –
Easy to set up
Very simple and was a plug and play install. Sound quality and head microphones were a big hit with Pastor
Bryan Haffenden –
Worked perfect
I needed both handheld mic’s for a dance and presentations they worked perfect
John calder –
Yup.. perfect device..
Works great.. crystal clear. Will be great for my band.. now to get 4 xlr to separate the channels into separate channels..
Leah H –
Outputs not isolated
I bought an audio mixer so that I could control all 4 wireless microphone channels on this unit without having to touch the volume knobs directly on the receiver. I wanted to be able to mute individual channels as needed. I assumed this would be an issue, but it is! The 4 XLR outputs are labeled A,B,C & D which is misleading because they all output all 4 channels mixed. So basically, you get 5 outputs (1 x 1/4in TRS and 4 x XLR) that are all the same mixed output containing all 4 channels. The volume knobs on the front do work to control each channel but the mixed output on all outputs is either a problem with my unit or a bad design. Maybe others can confirm if they have the same issue.Audio quality is okay for the price.
Grukhan –
Nice, good for small studio / audiences
On time delivery – value for money
Stephen Macdonald –
Party Time
All 4 units work great with no cross over on any of the channels. Very clear and have been used from 5 feet away to 120 feet with great reception
Denis Desjardins –
C’est ce que je cherchais.
Pas trop de retour de son.
gilles paradis –
Très bon pour le prix
Il est bien ce kit pour le prix
Amazon Customer –
Need splitter to use wasnt able to use at location but works well
The cost was perfect the instructions wernt a clear as needed mixing board needed to work system. Worked well at confrance good sound no static good value
Amazon Customer –
It’s okay.
It does a half decent job. Use this in my backyard for large gatherings. It’s okay but one of the mic’s cut out during something important so that was a little disappointing