Event Tech Case Studies, Applications, Technologies, Directory, Manufacturers, jobs
$0.00
Specification:
Item Type: Waterproof Distribution Box
Model: 8WAY
Material: ABS + PC
Waterproof Rating: IP65
Size: Approx. 200 x 155 x 90mm / 7.9 x 6.1 x 3.5in (Length x width x height after assembly)
Package List:
1 x Waterproof Box (Upper and Lower Parts)
4 x Screws
3 x Waterproof Cap
3 x Waterproof Connectors
3 x Waterproof Rings
| Date First Available | ‎ 23 December 2021 |
|---|---|
| ASIN | ‎ B09P2QFSTK |
| Item model number | ‎ Tisstinguqw1i8e2cg |
| Manufacturer | ‎ Tissting |
We at Event Technology support event professionals with the latest information in regard to technologies, suppliers, manufacturers, and products to increase event performance.
Copyright © All rights reserved. Event Technology Portal by Globibo.
Rdjamesjr –
Works great with a bit of a flaw.
I really do like this box. I bought the 2 breaker version https://www.amazon.com/gp/product/B09P7Z2C77/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1, I needed 1 , 25 amp 120V breaker for a RV inverter. Very compact and sturdy. What brings it down is that there is no cover plate, if you only need one breaker( I used aluminum duck tape to cover) . Also if you use 2 breakers there is no room to pass through a common wire and ground wire. Since I only need 1 breaker this was not a problem. I am assuming that the other versions have the same issues as this has come up in other reviews.
Repro63 –
The perfect solution for my project
I was looking for a space saving box for two DC DIN rail breakers. This box serves as the safety between my solar panels and solar charge controller. The breakers protect my cabling from high run-away current and also as an emergency disconnect.This box was the perfect size for the two DC DIN rail breakers. It is small and very compact saving space for my layout design. The protective cover keeps the breakers safe from accidental switching and also keeps the breakers clean and free of dust and dirt. The box is also very well made, strong and sturdy.I am very happy with the box and find it to be the perfect solution I was looking for on my solar project. It is a very good deal and value for the price and it gets 5 big fat stars from me.
C. Toombs –
Works ok, but with flaws that I had to work around
I was able to use this, but it had two major flaws. The first is that the holes in the end are way oversize for standard half inch hardware, which I was going to use. This was solved by 3D printing adapters for the hardware that I wanted to use. The second is that there is very little room to do the wiring at the ends of 2 pole DIN breaker. I believe that this was designed to be used by just running wires into the ends, without any conduit or even a clamp. If that’s how you plan to use it, it’s probably fine. If you intend to use standard hardware, it’s flaws will give you problems.
Geoff H. –
Not Waterproof
Works fine for my indoor application, but the grommets are basically for ascetic purposes only and will not protect from water intrusion
Amazon Customer –
a
a
MirthCastle –
Too Small
This box does not properly fit the mini breakers. The top and bottom holes, (though large) is a good 1/2 inch+ too low and you cannot align the wires properly (especially thicker #10 and less) with the breaker terminal(s).
John Springer –
Well designed and manufactured
I wanted this for a electronic watt-hour meter to measure energy usage in my RV. This product exceeded my expectations. I was expecting some cheap plastic gizmo; this is quality construction and I assume would meet commercial standards anywhere. I’m a happy energy-user.
BeK –
Avoid, poor design, poor quality
1) The DIN rail is non-standard. It is a cheap piece of stamped metal and very thing compared to a proper rail. Devices do not attach to the rail securely and are free to slide around.2) Removal of the gap fillers is far more tedious than it needs to be. Once removed, there’s no way to refill the gap.3) The depth dimensions are insufficient to properly hold some rail mount devices. Works okay for most of my MCBs but a few other devices will not fit as the case contacts them. No way it will be weathertight in this case.None of these issues exist with the 4 other DIN boxes I have from different manufacturers, but those companies do not offer a 15 way panel.It does have ample bus bar space, and otherwise seems sturdy enough.Would not recommend, even at half the price.
Dwayne Walton –
good
timely delivery, item as expected
R.F. –
2-Way box: Sturdy, however,
Well made, sturdy box, but if you are going to run more than 1 wire through the faux glands you will have to apply silicone to maintain water resistance. Also, mine arrived with no screws to secure the cover to the main box.