Description
Q/A:
Q:What is the difference between HT model and HA model?
A:HA model has a stronger abs material than HT ,and upgraded waterproof strip on the flip door for a better water resistance property.
Specifications
Product Name: GERSIK Distribution Protection Box
Main Color: Gray
Waterproof Rating: IP65
Housing Material : ABS Plastic Housing PC Cover
Model: HT-12/HT-8/HT-5/AT-4/AT-8/AT-12/AT-18/AT-24
Outer Size
HT5:119 x 159 x 90mm/4.68 x 6.25 x 3.54inch
HT8:201 x 155 x 90mm/7.9 x 6.1 x 3.54inch
HT12:255 x 198 x 108mm/10.03 x 7.79 x 4.25inch
HA-4:140 x 210 x 100mm/5.5 x 8.27 x 3.94inch
HA-8:215 x 210 x 100mm/8.5 x 8.3 x 3.94inch
HA-12:300 x 260 x 140mm/11.8 x 10.24 x 5.5inch
HA-18:410 x 285 x 140mm/16.14 x 11.22 x 5.5inch
HA-24:415 x 300 x 140mm/16.34 x 11.8 x 5.5inch
Description
Made of high quality plastic material, this distribution box is durable and sturdy.The cover is transparent so you can easily check circuit breaker state without open it. It is easy to install and convenient to use, simply mount it on your wall. Great to mount indoors, widely used for home, hotel shop and many other places.
Package Contents
1PCS x power distribution protection box;
1PCS x35mm guide rail;
4PCS x stainless steel self-tapping screws;
2PCS-M20x1.5 waterproof connector;
Amazon Customer –
worked as advertised
This unit works great. I noted that some people had an issue with the ground bar. I found if I just removed the screw to the ground bar and then attached all the ground wires. After all the wires were attached, I would then maneuver the bar back to it’s location. At that time, I would then put the screw in to attach the ground bar to the breaker box. this was in discussion about the screw holding the ground bar to the breaker box was not very strong.
Sean –
Good price, but it needs litter modified to fit my circuit breaker
Good price, but it needs litter modified to fit my circuit breaker.
David B. –
Product as described
Product arrived on time and was as described. Being used to hold disconnect switches for solar array and battery interrupt.
Gabi –
No holes for wires!
I had to use a stepper drill to make my own holes. It’s not as strong as metal, but it should hold up well as my generator load center. If you routinely use a generator, it sure beats the morass of extension cords around house and through windows!I think HT has holes… I got the HA.
Anthony Hope –
Box not strong
The plastic is not very thick. The box works but it’s very light duty. I want a heavy duty metal service box.
Benjamin Mejia –
Good looking and sturdy
I think the plastic on this box is plenty strong. It looks nice and is good if you have a tight space as its pretty slim. Exactly what I needed.
John –
Does the job
Needed a box that had multiple circuit breakers with IP65 certification. This one fit the bill for my solar system needs. Having “knockouts” (Really drill-outs) on every side gave me the flexibility required.
K.T. Portland –
Compact and does what it says
Nicely made, sturdy.
Pablo –
Great box for din rail CBS!
Great box for a few needed circuits. Comes with everything needed.
Bob z –
Thin plastic. busbars don’t anchor well to box
Busbars will spin around as they are poorly mounted inside box. If you try to tighten them down you just strip out the plastic the screws tighten into. I will have to epoxy them down and build up the surrounding mount so they can not spin.