Description
The SB-3701BNC is a 1 in to 4 out Composite BNC Video Distribution Amplifier. Used to distribute video signals to multiple destinations, this product allows up to 4 outputs that are identical to the source signal. Works with any video source with a Composite BNC connector. Video signals can be distributed from up to 300ft (100m). For proper amplification, make sure that your video source is closely located to the amplifier and connected with a short cable. Surface mount tabs provided.
J. Bradley –
Quality at a good price.A well built product considering its moderate cost. These units feature a metal case with real, replaceable BNC connectors. Only complaint is the use of a small red LED for a power on indicator. Power on indicators should always be green and bright enough to be readily seen in daylight. Red should be only used to indicate that a problem exists.Have tried a number of low cost video distribution amplifiers sold by other vendors. Most of them have been built by the same company and private labeled with the distributors name. On these the BNC connectors are of poor quality and are soldered directly to the PC board at two points. This works okay if there is no stress placed on the BNC connector. There is not other mechanical support on these models resulting in the connectors pulling off the PC boards, generally also damaging the ground connections. The cases on these other units are plastic with a thin aluminum front and back plate. Yes, they also have lame red LEDs.
old guy from Ohio –
Why pay more?Our need for video accessories is never-ending. As we transition to all digital, the number of old-school analog devices lessens, but likely will never disappear. I needed a new video DA, and this Shinybow 1X4 looked like it would fit the bill. I’d never used one of their products, but the reviews were encouraging. well, now I can be one of the reviewers. This device is well made, solid construction and outputs totally clean video. I will not hesitate to purchase another one of their products in the future. Just an FYI – the input is self-terminating, so if you are looking for a DA with a looping input, choose another unit.
Juan Chavez –
BNC Amplifier Works WellI purchased the BNC amplifier to add another monitor to my CCTV. You will also need a BNC cable to connect your dvr to the amplifier input. This is not included.
dcs –
As expected!This product was just what we needed. Lightning caused our last one to not work and we were only able to see our security cameras at 2 monitors instead of 4. We’re back to feeling safe in any room again! As always w/Amazon or thru Amazon, product was delivered sooner than expected. Thanks!
Hubert P. –
prity goodHay readers this splitter makes life easer for the electronic’s installer like .If you want quolity piture surveilance,cable or what ever this splitter is a possibility thanks Amazon.
4-Way SVGA VGA Splitter Amplifier Multiplier 400 MHz – Black
Steve –
Used for video outputUsed this on my security dvr output and fed to all my TV’s aux in ports so I can look at my cameras from any TV in the house. Works great
TheDonH56 –
Great productExcellent video reproduction. I have been using several Radio Shack ones, I decided to try these, there was a definate improvement in the video.
horace e. –
Two Starswould not work with what I wanted it for
Captain –
nice packaginggreat little product, so far so good. got it to distribute video from my security camera system to four tv’s aroung the house.
kd –
goodthis item works great, it fits good and works welli will reccomend it to any body any time lol.