2 Pack Speaker Wall Or Ceiling Mount For Logitech Z906 5.1 Surround Sound Speaker Syestem Tilt And Swivel Adjustable Mounting bracket For Logitech Z906 Satellite Speakers
Products Features and Specifications:
● Fit for Logitech Z906 5.1 Surround Sound satellite Speaker
● 2 In 1 Design, not only support as a wall mount but also support as a ceiling mount
● Multiple Adjustments Direction, through loosened and tightened the side screw to achieve Tilt & Swivel 180°adjustable- (90° up and 90° down) & (90° right and 90° left) adjustment
● Length Adjustable Design, the short length type more fit for wall mount, the long length type more fit for ceiling mount
● More Beautiful Design, the screws are be hidden with a small cover, the overall appearance looks more beautiful
● Made from high-strength steel and easy to install it
● Easy installation
- 2 x Wall Speaker Mount (Black)
- 2 x User Manual
- 2 x Mounting Hardware Kit
If you have any questions, please feel free to contact us before leaving feedback, we will do our best to resolve it for you, thank you.
Rob H. –
perfect for the Z906 speakersThese are pretty easy to install and they hold the speakers in place really well. It took me just a little extra time to make sure I the assembly done right before committing to drilling holes in the wall, but it wasn’t hard, especially after you do the first one the rest are really easy. I bought these for my left and right front and rear speakers. I used the shorter arms for the rear speakers and the longer arms for the front speakers. I am trying to decide if I really want one more for my center speaker. If I do want a wall mount for it, I will definitely get this same mount.
R. A. Maldonado –
Never Underestimate the Little GuyLet me tell everyone about this mount, at first the instructions were vague, took it a bit to figure it out. I gave up cuz I thought they would not hold my 8 pounder ATMOS speaker’s. They didn’t have any weight limits stated in the listing not anyplace. I set up the return and repacked everything up to return the next day. In the meantime I looked hi and low for a replacement, there just isn’t any with this quality out there. I didn’t want anything that looked cheap. Although I really couldn’t hide the wires, the did come with nice covers to hide the screws. After much search I came across these mounts again this time the listing had bigger speakers? Hum, same product, different speakers?I took a second look at them and found they were exactly what I needed, I was still wondering if the would hold my speakers. I got them up and tested them, Yup, there strong enough, just needed stud to tap into, I found enough for the two front holes, used the back with the anchors, those speakers aren’t going anyplace.I have key hole type speakers, but I can see this working with 1 hole threaded speakers, I don’t want to put any holes in my speakers, I wanted to use what they gave me on the back. Klipsch speaker’s have either key hole or one threaded screw holes for mounting the small surrounds, but ATMOS speakers came the key hole type. I guess they were made to be placed on top of my towers and bounce off the ceiling. I used them this way for over a year until I realized through UTube advance, that configuration was no good. I thought bouncing off the ceiling was how it’s done unless you have them installed in the ceiling. I am not ready for that yet, This will do very nicely for now. In 2 years I plan to upgrade to 7.4.2. That’s a total of 13 channels if pure glory. With this installation I just finished I’m at 7.2.2 and loving it, my new Marantz 7 channel Amp coming soon to take over the load of my Marantz SR7010 AVR. Hope this review helps, happy tunes everyone.I wanted to Give this speaker mounts 3 thumbs up, if you are willing to put time in, be a little creative with mounting and can find a wood stud to tap into, then theses are the mounts for you.As of 10/3/2020 my mounts failed, I put to much weight on them so they didn’t stay up 90 degrees anymore, so I came up with a fix, I tightened them down and attached a wire from the speaker to the bracket with a small screw on the speaker and bracket. I made sure before I tightened and secured the wire the speaker was at 90 degrees angle. The wire kept the speaker upright and I don’t see any further problems with the speaker dropping anytime soon. See photos!
Angelo Gomez –
All I Needed😌Great And Easy to setup 🙂
Assembly not straightforward. Fiddly.Unclear assembly instructions, including illustrations in leaflet (also font too small; readability a challenge).
Horrible designFirst of all, this is a horrible design. I purchased this for Logitech Z906 speakers. I decided to give it a go since I already had the one delivered to me. Here’s where their design fails. I wanted to use this as a wall mount. Ok, look at the instructions and the very 1st step, yup you guessed it design fail. You’re supposed to attach the pivot head to the wall mount and secure it with the provided screw. Epic fail. The screw head and the wall plate are the same exact size. I have no idea who engineered this but they need to be fired. If the hole on the wall plate was smaller or if the screw head was a little bigger it wouldn’t be a problem. I don’t feel that I should have to go out and buy new screws for something that is brand new. This bracket should have a bit smaller hole with a beveled edge to allow the provided screw to hold everything together and flush.Second, even though they are made out of metal, they’re too expensive for what it is. $22.99 for one wall mount is too much. Not even $22.99 for a pair…. Seriously one wall mount.There are better options on Amazon for speaker wall mounts. Avoid this product.
David A. Begliutti –
what a mountgreat function , works great on my klipsch speakers , have 2 ceiling mounted and 2 wall mounted , works perfect
Good sturdy mount.Pretty easy to install. Comes with wall anchors so you dont have to worry about having to find a stud. Very sturdy. Works good.
Not the most user friendly manual 😂The product is good but the manual does not clearly explain how to assemble the product but once you get the hang of it, it becomes easy.