Description
Lanzar Model : VCT2610 6000 Watt 2 Channel High Power MOSFET Amplifier 3000W x 2 Output at 4 Ohms 6000W x 1 Bridged Output at 2 Ohms2 Ohm Stable MOSFET Power Supply Variable Hi-Pass : 40 Hz-250 Hz Variable Low-Pass : 40 Hz-250 Hz Variable Input Level (Gain) Control : 6V-200mV Variable Bass Boost : 0-18dB Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave Sub Sonic Switch Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2×60 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.63”W x1.78”H x 21.97”L
The Lanzar 6000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.
Dean –
Don’t believe me? Just watch!
I’ve only had my install just today but am VERY PLEASED now that I no longer just have weak ol’ stock factory speakers… The speakers I ended up having installed were 2 15 inch RE Audio 4 Ohm speakers and, it sounds VERY NICE with my new T.I. CD. I live in a small rural area so, I havent done a bunch of driving since I had my install but tomorrow is Saturday and i’ve been single for a few years now… Watch… I’m about to turn it ALL the way up so the girls with them little ol tiny shorts will look! I’ma stop and be like…Update: So I went on a 13+ hour road trip last week and you wouldnt believe…. It did not shut off 1 single time… That to me is absolutely AMAZING. Keep in mind though I have an Escalade and I ride with the 2 windows in the back partially cracked to get in fresh cool air to the amp. Amp is mounted to the back of Subwoofer box. Trust me ya’ll I’ve heard systems before and come from an area where EVERYBODY wanted a system in their ride… And for the price you pay on this sucker…. In my opinion your a Baby to complain. This thing be HITTIN! Subs I have are 2 15″ RE Audio 1000 RMS Subs. When money is sufficient will likely switch to a stronger RMS X 4 Ohm AMP but to get up and running, I’d go with this one if I were you.
josh o. –
Will only power 1 sub at 1000w ea
Not 6k watt will push 1 1000w sub but not both
Chad milligan –
Unfortunately it blew up right after I wrote a review crazy worked great then died.
It sounded good for a few months then just quit working out of no where .It’s sad to pay $170 for something that will not last 4 months.
BlueDragonRacer –
Quite Nice for the Buck
One thing to note is in the Manual that comes with it that Amazon did not put on here is More Technical Specs so here they are.RMS Power @4 Ohms 300 watts x2THD @4 Ohms 450 watts x2RMS Power @2 Ohms 600 watts x2THD @2 Ohms 900 watts x2Maximum Power Output @2 Ohm 6,000 watts x1Bridged Power @4ohm 8,000 watts x1Low Level Impendance Input: 10K OhmsLow Level Sensitivity Input: 200mV-6V AdjustableS/N Ratio: 95dBChannel Separation: 65dBChrossover Filters-Low Pass:40 Hz-150 HzHigh Pass:40 Hz-250 HzBass Boost: 0~+18dBSub Sonic Filter:10-100 HzStereo Mode: 2-4 OhmsBridged Mode: 4-8 OhmsFuse Size: 60A x2Power Supply Voltage: 14.4V DC Neg. Ground (10.5-16V)So Note that This Amp says it can do 8,000 watts not just 6,000 and so far it Feels like it can but i dont have a sub that can handle 8,000 watts once i do i will post again hope this helps any body.
Josh –
9/10 Amplifier
Great amp with good sound quality, the only problem i had was overheating on one occasion. The cool thing is the amp comes with a temperature sensor and will automatically power down if it gets too hot as to not fry the circuitry. it only overheated after i was blasting my subs on full volume for 1.5~ hours. Great value 9/10
Blac K Sheep –
It’s not at no where even close to 6000 watts
The company that sold this is by far 100% fast delivery. Thanks as well the amp is very upsetting. It has no remote gain built in crossover for sub sucks works better with sub boost turn down/ turn up no difference at all promise. Battery hogger for show . Had to install another battery at equal size to the one in my Chrysler 300c. As well a compactor 6 fad. That Just to keep my lights from dimming. As well I Had a Planet Audio 4000 watt that hit harder. As well for the price what can you expect.. The amp is about four months old at least it will be on the 18 of April as well the power sucks. It can’t even compete against the 1200 watt fosgate, really regret the purchase.
Kenneth Davis –
Biggest bang for your buck in class-c amp
Biggest bang for your buck in class-c ampsSounds great with dual kicker comp-c 15s in sealed box…
Amazon Customer –
Good deal
If you want your ears to bleed put this amp on 6 6x9s. Was jamming yesterday & my ears still ringing.
EyeHoleMan –
It surpassed expectations.
I love its power it powers my 4 Gothic subs perfect
Ryan –
Love It
I put this in along with two 4000 watt Pyle Dryvers. This amp is crazy. When i first put it in, i had gotten a dud. When they .When they sent the second one, I promptly put it in and was blown away. The only thing i have to complain about this amp is the bass boost isn’t very subtle. It seems as if it’s all or none. But no problems, the bass boost is amazing.I had my subs wired for 8 ohms for simplicity. i tried wiring them for 2 ohms to test the amp. when i did that the amp started tripping out and went into protection mode. I can’t turn it up because it gets hot. It says it can take 2 ohms on each channel, but it won’t. i do like this amp, but i would choose differently next time