6. Built-in MP3 player with Bluetooth-compatible transmission(U-DISK MP3 input)
7. All channels have peak signal indication and pre-fader monitor selection
8. Each channel has MUTE and PFL switch
9. Independent Headphone Monitor and Level Display System
10. Dual 12 sections effect level monitoring indicator
3 Band equalization adjustment
High / Medium / Low independent adjustment, optimizes music performance
16 DSP EFFECTS
HALL, ROOM, Chorus, Transposition, PINPENG DELAY, REVERB and DELAY (from 125 to 1400MS delay)
Bluetooth-compatible /USB connection
Devices with Bluetooth-compatible connectivity can be used,as well as USB playback
Each channel has MUTE and PFL switch
Make it easier for you to get the sound you need
1. MIC/LINE:12-Channels Microphone/Audio Combined Input
2. +48V Phantom Power
3. High Definition LCD Working Display Screen
4. 60mm Precision Sliding Potentiometer
Introduction of the function key
1.GAIN(-60dB~-15dB):This is a function which adjusts the input sensitivity of each channel in order to input the constant level of the signal.
2.PEAKChannel PEAK signal indicator:When the volume gets too loud, the [PEAK] LED indicator light will keep flashing.
3.HIGHTreble tone controller:Adjust the controller to enhance or attenuate for 15db at 12KHz.
4.MIDMid tone controller:Adjust the controller to enhance or attenuate for 15db at 2.5KHz.
5.LOWBass tone controller:Adjust the controller to enhance or attenuate for 15db at 80Hz.
6.FXChannel effect controller:Adjust the control to set the effect level you want to achieve.
7.PANR/L Output Adjust knob:Adjust to balance the volume of each channels,In the centre position,equal amounts of signal are sent to the left and right busses.
8.MUTEChannel MUTE Switch:Adjust to select whether the channel is output.
9.PFLChannel PFL Switch:Used for headphone monitoring of each channel,regardless of the main m