Description
Voltage: DC10-30V(Fit all 12V/24V vehicles) LED Power(W): 20W(2 x 10W High Intensity LED) Led Chip: HFL3 Led Wattage(W): 10W Led Qty(pc): 2pcs Lumen: 2100lm/pc Led Color Temperature: 6500K Beam Pattern: Driving Light Working Temperature: -40-80°C/-40-176°F Working Lifespan: 50000 hours Housing Material: Aluminum Bracket Material: Stainless Steel Lens Material: PC Certifications: ECE R112 R10/CE/RoHS Waterproof Rate: IP67 Waterproof, dustproof, quakeproof and anti-corrosive. Lighting Performance: 240m/1lx Applications: Devices Lighting: Back Up Light, SUV, Truck, Trailer, ATV, RV, Jeeps, 4×4, Cars, Motorcycles, UTV, Forklift, Trains, Boat, Bus, Road Buggy, Sand Rail, Golf Cart, Zero Turn, Motorcycles etc. Other Equipment Lighting: Grain Drill, Mower, Snowplow, Excavator, Dozer, Road Roller, Crane, Tractor, Harvester, Fire engine, Rescue Vehicle, Camping, Mining, Construction Lighting, etc. Scenes Lighting: Garden, Backyard, Farms, Orchards, Camping, Garage, Indoor Lighting. (Note: Must use a voltage transformer/converter to change the AC 110-120V to DC 12V for indoor use.) Tips: They are aftermarket parts. NOT D. O. T. approved. Do now not use if D. O. T. is required. For off road use only. Before putting in this product, please check your state/provincial and local/municipal laws and regulations. Please finish the set up with the aid of authorities or set up the wiring harness below the coaching of professionals
Rogelio –
BOUGHT CAUSE A truck driver said they were good
really bright i bought two sets they over power my head light and fog lights distance and floor brightness really usable light such a small foot print (reason i bought two sets). stainless hardware is on point. my favorite fog light so far
Juan Resio –
They are good.
If you are looking for some foglights. These will do the job. They give light just the easy you need them to be. They are not spot lights They are flood lights with a good angle for use of foglight. They don’t blind oncoming traffic if adjusted correctly. I would buy them again.
Don Mattingly –
Small but very unique to have engineered optics
You do not see the smaller light pods with engineered light optics. Typically they are straight-on. The reflective style allows for controlled light dispersal and is the standard with the high-end lights. These specifically have a great dispersal pattern perfect for fog lamps. They would also work great for rear floods if mounted up high. Nice fit and finish.
Donovan James –
Awesome Beam Pattern
These LEDs have a really nice Beam pattern that is actually useful. They would work excellent as Fog Lights. They have a nice wide beam that is not very tall. This allows them to be aimed pretty precise with a wide FOV without blinding a bunch of people. They work great and the box was heavier than I expected when I picked it up. They have been working just fine for me.
Ben K. –
Great aux lights for my tractor
I like the compact size of these lights, and their lumen output. They are mounted on the loader arms of my tractor, and really help me see better when I’m running the tractor into the evening hours. Installation was very simple, and the sturdy light housing will ensure that they don’t take any damage. These lights have been great to use so far, and overall I’m very satisfied with their quality and performance.
Winchell350 –
Solid and robust
I ordered these to use for auxiliary reverse lights on my Jeep JL. They mount solid via the supplied hardware. The wires are long enough to easily work with and splice into your power source and they have good light output. Now I can actually see to back up.
A.N. –
Aluminum housing, seem well made
These lights seem to be very well made. They have aluminum housing and come with mounting hardware. There are 12″ wire leads to work with.IP68 waterproof = With an IP68 rating, they are water resistant in fresh water to a maximum depth of 1.5 metres for up to 30 minutes, and are protected from dust – all without the need for extra cases or covers.DC10-30V fit all 12 volt and 24 volt vehicles.LED power 20 watt, 2×10 high intensity LED.2100 LM/PC.Driving pattern.Working temperature negative 40 to 65c/ -40 to 176F.LED color temperature 6,000k pure white ray
Ricky L. –
Functionality
I really like these lights , they are going to look great on the dune buggy.
Red Ryder –
Good as fog lights, not driving lights as listed
These are solid lights that are made well and look like they will last, but they’re not driving lights. I installed these on the front bumper of my JL with LED headlights and was hoping they would be a good spot pattern for long distance lights to augment my headlights plus my a-pillar mounted flood light pods. These provide a good color and good lighting, but it’s much more of a flood pattern than a spot, which you would expect from a driving light.If I’m not using any other lights these do provide some wide beam light and decent light down the road. But they don’t add any distance to my standard head lights even on low beam, and they make no difference at all when I use my high beams. They also don’t provide any additional light over my already installed higher mounted flood lights.These are easy to install and do provide good wide beam light if they’re your only flood lights. They are also well made and feel water tight. But if you are looking for long distance driving lights as advertised there are better choices out there.
Dennis –
Really nice lights.
These are great lights. They are a little more expensive than some others, but they are worth it. First, they look different than most cheap LED lights. You can’t see the LED straight on. The LEDs are in the bottom and the light is reflected out. The reflectors are built perfectly. The beam pattern is a wide line of light with excellent cutoff. You can run this as a fog light and not blind oncoming traffic. The reach is great as well. They are bright enough to provide good detail at 60+ yards. The mounting brackets are thicker and more sturdy than most cheaper lights.